Surprising wide range and high power
C373A has been achieved a wide range of machining of AWG#2(30sq)～AWG#28(0.08sq) in one machine. It can be widely used in a wide variety of industries since it corresponds to the round cable up toφ11mm maximum diameter.
For flat cable
C373AF inherits Performance from C373A.
The maximum width can be processed to cable up to 40 mm flat cable, ribbon cable dedicated machine.
Optional equipment for additional uses
The useful option would be a mid stripping unit CMS-801A2 (for C373A) and
a flat cable slitting machine CSL-503 (for C373AF).
▪Front/Rear strip length 3mm
▪Normal wire mode
|Total Length||Processing Capacity|
|Stripping Length||Front / Rear：0.1mm～47.9mm|
|Cutting Tolerance||± (0.1+0.0005×L) mm|
|Wire Size||AWG#2 (30sq)～#28 (0.08sq) *Depends on the wire type|
|Wire Diameter||Maxφ11mm *Depends on the wire type|
|Wire Type||AVSS, VSF, IV, KV, UL, Teflon etc.|
|Power Supply||AC100V, AC200V～240V 50/60Hz|
|Optional Equipment||CMS-801A2 Mid stripping unit, CSL-503 Flat cable slitting machine|
Mid Stripping Unit
CMS-801A2 can handle wires with an outer diameter of up to 8mm. It can mid strip in up to 10 different positions on a single wire. Automation has been accomplished thus far by this revolutionary equipment.
Flat Cable Slitting Machine
CSL-503, which has been developed as a special optional item only for C373AF, can make a slitting processing on the ends of flat cable. This is a automatic slitting machine intended to improve the comfortable performance of C373AF.