Possible to cut maximum six different lengths with Programing Function!
|« Cutting Length »||5～999mm|
|« Tape Width »||6～60mm|
« Usable Tapes »
Craft, PP, Vinyl, Filament, Glass Cloth, Double-Sided, Strapping, Protective Film, Aluminum Foil and Others
▪Six different lengths can be programmed for cutting.
▪Remove Roller Unit without using any tools & easy maintenance.
▪Two roll tapes can be cut at the same time due to Dual Photo Sensor.
▪Preset Mode and Loop Mode are available.
▪A cut piece of tape is positioned to take out.
▪Set a tape without using bobbin.
▪Non-adhesive tapes can be cut.
Cut a tape with backing paper while removing it.
Arm Stand ▶
|Tape Width||Front / Rear：0.1mm～47.9mm|
|Usable Tapes||± (0.1+0.0005×L) mm|
220mm/sec. Approx. 50pcs/min. *in the case of cutting 100mm with craft tape
|Maximum Roll Diameter||300mm|
|Accessories||Separator, Blade Oil, Guide Plate, Power Cord|
|Rated Voltage||AC 100-240V 50/60Hz 25W 2A Fuse (Built-In Inlet)|
|Dimension||W116 × H140 × D213 mm|
*Some of usable tapes may not cut as depends on the material and tape brand.
*Cutting length may be beyond cutting tolerance as depends on the type of tapes.
*Specifications are subject to change without prior notice.