C371A is the standard machine in the Casting series which is a new model from C351 and C371. It balance high speed with high power, so it is most useful machine.
For flat cable
C371AF inherits Performance from C371A.
The maximum width can be processed to cable up to 18 mm flat cable, ribbon cable dedicated machine.
Optional equipment for additional uses
▪Front/Rear strip length 3mm
▪Thin wire mode
|Front / Rear：0.1mm～47.9mm
|± (0.1+0.0005×L) mm
|Minimum processing Length
|AWG#7 (10sq)～#28 (0.08sq) *Depends on the wire type
|Maxφ11mm *Depends on the wire type
|AVSS, VSF, IV, KV, UL, Teflon etc.
|AC100V, AC200V～240V 50/60Hz
|CMS-801A2 Mid stripping unit, CSL-501 Flat cable slitting machine
Mid Stripping Unit
CMS-801A2 can handle wires with an outer diameter of up to 8mm. It can mid strip in up to 10 different positions on a single wire. Automation has been accomplished thus far by this revolutionary equipment.
Flat Cable Slitting Machine
CSL-501, which has been developed as a special optional item only for C371AF, can make a slitting processing on the ends of flat cable. This is a automatic slitting machine intended to improve the comfortable performance of C371AF.