The latest full automatic crimping machine,
which is faster start-up time, stable quality, and faster processing speed!!
■By building a unique operating environment, the start-up time from turning on the power is overwhelmingly shortened.
■By dividing between cutting blade, front stripping blade and rear stripping blade, it is possible to further stabilize the quality of the stripping and increase the processing speed.
■In addition to the conventional spraying mechanism, the strip dust is less scatter by vacuuming.
◆CFM Crimp force monitor
The load cell, which is installed in the ram of crimping unit, measures the precise crimping force for every terminal crimping. Since an encoder is used to control all the angles, measurement timing does not change regardless of voltage fluctuation.
◆CHA Crimp height automatic reproduction mechanism
Crimp quality is controlled by the crimp height. Since crimp force is related to the crimp height, the C551SSAZ automatically adjusts the crimp force (crimp height), when the crimp force value is specified. Settings can be saved in memory function.
◆One machine to cover thin and thick wires!
CASTUGNON covers a wide range of wire size: #32~#12. You need only one machine to perform all different processing, which conventionally required three to four different machines.
◆User friendly + easy operation
Clear large size full-color LCD touch panel. The interactive picture panel is available for 6 languages, Japanese, English, Korean, traditional Chinese, simplified Chinese and Indonesian.
▪Wire / 0.5sq(AWG#20)
▪Front and Rear 4.5mm strip
▪Thin wire mode
▪Speed all set to 9
▪Thin wire diameter / 0.8mm
▪Cuter move back / 0.2mm
▪3 blades mode
|Total Length||Number of Processed wires|
*This is the maximum level measured at Kodera. It may be under the level written here
due to the type of the wire or terminal and also other processing conditions.
|Stripping Length||Front end: 0.1～30mm / Rear end: 0.1～20mm|
|Minimum processing Length||L1*≧44mm [25mm]|
|Maximum cutting length||99,999mm (Approx. 100m)|
|Cutting tolerance||Within ±(0.2+0.002×L) mm *L=Cutting length|
|Crimping terminal||Open barrel chain terminal(Side-feed/End-feed), Closed barrel chain terminal|
|Stroke||30mm or 40mm|
|Power supply||Single phase AC200V～AC240V 50/60Hz|
|Power consumption||During rest: 270Wh / At maximum: 891Wh|
|Width × Length × Height||1090 × 780 × 1550(mm)|
|Applicable wire diameter||AWG#12～#32 *Depends on the wire type|
|Applicable wire type||AV, AVS, AVSS, CAVUS, KV, KIV, UL, IV, Teflon etc.|
|■Optional Equipment||CMS-845A2 Mid stripping unit|